Used
You are bidding on a Tektronix DSA8300 Digital Serial Analyzer Sampling Oscilloscope. It will arrive with a fresh calibration performed by an ISO 17025 accredited lab!
The DSA8300 is a state-of-the-art Equivalent Time Sampling Oscilloscope that provides the highest fidelity measurement and analysis capabilities for Communications Signal Analysis, Serial Data Network Analysis, and Serial Data Link Analysis applications.
KEY PERFORMANCE SPECIFICATIONS
Very low time base jitter:
425 fs typical on up to 8 simultaneously acquired channels
<100 fs on up to 6 channels with 82A04B phase reference module
Industry’s highest vertical resolution – 16 bit A/D
Electrical resolution: <20 µV LSB (for 1 v full range)
Optical resolution from <20 nW for the 80C07B (1 mW full range) to <0.6 µW for the 80C10C (30 mW full range)
Optical bandwidths to >80 GHz
Electrical bandwidths to >70 GHz
Over 120 automated measurements for NRZ, RZ, and pulse signal types
Automated mask testing with over 80 industry-standard masks
KEY FEATURES
A wide variety of optical, electrical, and accessory modules support your specific testing requirements.
Optical modules
Fully integrated optical modules that support optical data rates from 155 Mb/s to 100 Gb/s
Certified optical reference receivers support specified requirements for standards-mandated compliance testing
Optical bandwidths to >80 GHz
High optical sensitivity, low noise, and wide dynamic range of the optical sampling modules allows accurate testing and characterization of short-reach to long-haul optical communications standards
Fully calibrated clock recovery solutions – no need to manually calibrate for data pick-off losses
Calibrated extinction ratio measurements ensure repeatability of extinction ratio measurements to <0.5 dB among systems with modules with this factory calibration option
Electrical modules
Very low-noise electrical samplers (280 μV at 20 GHz, 450 μV at 60 GHz, typical)
Selectable bandwidths 1 allow the user to trade-off sampler bandwidth and noise for optimal data acquisition performance
Remote samplers 2 or compact sampling extender module cables support minimal signal degradation by allowing the sampler to be located in close proximity to the device under test
High-performance integrated TDR (10 ps typical step rise time) supports exceptional impedance discontinuity characterization and high dynamic range for S-parameter measurements to 50 GHz
Analysis
Complete suite of over 120 automated measurements for NRZ, RZ, and pulse signal types
Automated mask testing with over 80 industry-standard masks. New masks can be imported into the DSA8300 to support new emerging standards. Users can define their own masks for automated mask testing
Vertical and horizontal histograms for waveform statistical analysis
Vertical, horizontal, and waveform cursors (with measurements)
Jitter, noise, BER, mask testing, and Serial Data Link Analysis (SDLA) are provided through the 80SJNB Essentials and Advanced Software Application Options
Advanced TDR analysis, S-parameter measurements, simulation model extraction, and serial link simulation capabilities are provided by the IConnect® Software Application options
High test throughput
High sample acquisition rate up to 300 kS/s per channel
Efficient programmatic interface (IEEE-488, Ethernet, or local processor access) enables high test throughput
This unit is in excellent condition, has been fully tested and is guaranteed functional. It comes w/ a 14 day right of return should it not perform to your expectations. Please review pics and text carefully before bidding to verify accuracy of description. If you don't see it in the pictures, it is not included.
Insurance is included in UPS shipping charges. Item shipped internationally on buyer's UPS, FEDEX or DHL accounts only.
We will accept payment for this item by company check, cashier’s check and wire transfer only.
If you have zero feedback, contact us prior to purchase so we know you are a serious bidder. Otherwise, we may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction. Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed.
Please note that shipping and insurance costs are non-refundable.
Our feedback is very important to us and we strive for 100% positive on every transaction. If you are unsatisfied with any aspect of your transaction, please contact us before leaving negative or neutral feedback so that we can address and remedy the issue immediately. Additionally, we are always happy to leave positive feedback for our trading partners after a successful transaction.
Make sure that you check out our other auctions for more great deals on test and measurement equipment.
Thank you and good luck bidding.
Need your unit calibrated by an ISO 17025 accredited lab prior to shipment? Not a problem. We work with numerous calibration and repair companies that can provide your required service at competitive prices.
