We buy, sell and rent general purpose, optical and RF test and measurement equipment. We pay top dollar for your unwanted, surplus or defective gear. Let us make you an offer on your new or used Agilent, Tektronix, Anritsu, Fluke, Rohde & Schwarz and IFR instruments.
Tektronix 80A07 BERTscope Electrical Clock Recovery Module, 100 Mb/s to 12.5 Gb/s!
You are bidding on a Tektronix 80A07 BERTscope Electrical Clock Recovery Module, 100 Mb/s to 12.5 Gb/s. This unit has a list price of $40,500 USD!
The 80A07 recovers clocks from serial data streams for all of the most common electrical standards in the continuous 100 Mb/s to 12.5 Gb/s range. Auto locking capability is selectable from the user interface or programmatic interface, so the design and test engineers can search and lock onto signals of unknown data rates. The 80A07 offers complete configurability and state-of-the-art specifications and is the preferred solution for most serial data standards due to excellent stability, superior jitter and slew rate tolerance for recovering clocks from stressed or degraded signals, and unequaled PLL bandwidth and roll-off shape control for either Golden PLL compliance testing or custom PLL response. The 80A07 also locks on spread-spectrum signals.
In addition to standard rate support, users can specify custom bit rates on either of the two modules (80A05 & 80A07) in order to test devices, modules and systems running at emerging or non-standard rates. The wide clock recovery ranges support for user-specified bit-rates provide complete clock recovery solutions for testing a wide range of computer, communications and consumer electronics signaling rates and standards.
The 80C12 optical module with either the 80A05 or 80A07 clock recovery modules provides a complete solution for optical rates between 155 Mb/s and 12.6 Gb/s.
Features & Benefits:
Electrical Clock Recovery for:
Enumerated Bit Rates between 50 Mb/s and 12.6 Gb/s
Continuously Variable Rates from 100 Mb/s to 12.5 Gb/s Enables Support for Current, Emerging, and Future Bit Rate Needs
High Jitter Tolerance, Slow Slew Rate Tolerance for Recovering Clocks from Stressed, Degraded, or Spread-spectrum Clocked Signals
Excellent Time Base Stability and Ultra-low Residual Jitter (as low as 250 fsRMS) for Best Measurement System Fidelity
Unequaled PLL Bandwidth and Roll-off Shape Control (Tunable loop bandwidth of 100 kHz to 12 MHz) Enables Control Required by Many Compliance Standard Tests
Clean 50 Ohm Path for the Best Signal Acquisition Fidelity Applications
High-speed Serial Data Link and Device Characterization for Computer, Communications, and Consumer Applications
Compliance Testing of Electrical Signaling
High-speed Optical Communications Testing
Jitter, Noise, BER, and Signal Impairment Analysis
Testing of Frequency Agile or Multirate Devices
This unit is in excellent condition, has been fully tested and is guaranteed functional. It comes with a 30 day right of return should it not perform to your expectations. Please review pics and text carefully before bidding to verify accuracy of description. If you don't see it in the pictures, it is not included.
Insurance is included in UPS shipping charges. Item shipped internationally on buyer's UPS, FEDEX or DHL accounts only.
We will accept payment for this item by company check, cashiers check and wire transfer only.
If you have zero feedback, please contact us before you bid to let us know that you are serious, otherwise we may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction. Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed. Please note that shipping and insurance costs are non-refundable.
We are always very happy to leave appropriate feedback (hopefully very positive).
Make sure that you check out our other auctions for great deals on other test and measurement equipment.
Need your unit calibrated by an ISO 17025 accredited lab prior to shipment? Not a problem. We work with numerous calibration and repair companies that can provide your required service at competitive prices.
Spaulding Surplus, LLC was established in 2002 and we pride ourselves on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around. Our equipment is sourced from a variety of manufacturers including Agilent/HP, Fluke, Tektronix, Rohde & Schwarz, LeCroy, Anritsu, Advantest, Aeroflex/IFR, ILX Lightwave, JDSU, Wavetek, etc. We are also dedicated to providing fair and competitive bids for your unused test equipment and excess inventory. WHY PAY MORE FOR THE SAME EQUIPMENT?
We accept payment by company check, bank transfer and Paypal (for items valued below $1500 USD). Payment must be received within 5 days of close of auction. Our mailing address is below and our bank info can be forwarded upon request. Spaulding Surplus 12829 Landale Street Studio City, CA 91604 Contact Us at brannon@spauldingsurplus.net ph.
All instruments are professionally packed and shipped via UPS GROUND with full insurance. We typically ship within the continental US only (please no PO Boxes) unless other arrangements have been made with the buyer. International customers may provide their UPS, DHL or FedEx account for international shipments. Items will be shipped within 7 business days of payment.
All items sold on Ebay come with a standard 14 day right of return warranty from the date of receipt, unless otherwise specified in the auction details. Payment in full is required prior to shipment. Buyers are required to notify us immediately if an instrument arrives damaged, and must keep all boxes and packing materials in case a UPS damage inspection is necessary. An extended warranty of 30 days is available for all direct purchases from Spaulding Surplus, LLC and established customers purchasing directly may qualify for net 30 payment terms with PO required prior to shipment. A complete list of our company terms and conditions can be accessed thru the link below. Spaulding Surplus, LLC Terms & Conditions
All Ebay items can be returned for a full refund within 14 days of purchase should they not function as intended, unless they are being sold AS IS with known defects. Items purchased directly from Spaulding Surplus come with a standard 7 day right of return and 30 day warranty. Spaulding Surplus, LLC shall not be held liable for any damages resulting from buyer/operator negligence, or the improper use of its equipment, nor does it warrant their suitability for any specific application or project. The verification of product capability is the sole responsibility of the buyer. PO's and purchases cancelled due to insufficient instrument capability, buyer's remorse or loss of order are always subject to a 20% restocking fee. A complete evaluation is required for any instrument returned under warranty, and refunds are not issued until said evaluation has been completed by an ISO 17025 accredited calibration lab. WE KINDLY REQUEST THAT BUYERS CONTACT US FIRST SHOULD THERE BE ANY PROBLEMS WITH THE ITEM PURCHASED, RATHER THAN FILING A "NOT AS DESCRIBED" CLAIM WITH EBAY OR IMMEDIATELY LEAVING NEGATIVE FEEDBACK. WE HAVE BEEN IN BUSINESS FOR OVER 15 YEARS AND ALWAYS STRIVE FOR PERFECT FEEDBACK AND INTEND TO PROVIDE QUALITY EQUIPMENT AND EXCELLENT CUSTOMER SERVICE TO ALL OF OUR CUSTOMERS. IF YOU EVER HAVE A PROBLEM WITH A TRANSACTION WE WILL MAKE IT RIGHT!
Spaulding Surplus, LLC prides itself on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around.
