Powered by Frooition
Shop Categories
AmplifiersAnalyzersCable & Antenna AnalyzersCablesCalibration KitsCalibratorsCounters / TimersDetectorsEmulatorsError DetectorsLogic AnalyzersMetersModules / Plug InsMultimetersNetwork AnalyzersNoise GeneratorsNoise SourcesOpticalOptical Spectrum AnalyzersOscilloscopesOtherPattern GeneratorsPower MetersPower SensorsPower SuppliesProbesRF / MicrowaveService Monitors / Test SetsSignal AnalyzersSignal GeneratorsSpectrum AnalyzersThermal ImagersVXI
We buy, sell and rent general purpose, optical and RF test and measurement equipment. We pay top dollar for your unwanted, surplus or defective gear. Let us make you an offer on your new or used Agilent, Tektronix, Anritsu, Fluke, Rohde & Schwarz and IFR instruments.
Rohde & Schwarz FSUP26 20 Hz to 26.5 GHz Signal Source Analyzer with Options B4/B21/B23/B25 - MFG CALIBRATED!
Item Description
Rohde & Schwarz FSUP26 20 Hz to 26.5 GHz Signal Source Analyzer with Options B4/B21/B23/B25 - MFG CALIBRATED!
You are bidding on a Rohde & Schwarz FSUP26 20 Hz to 26.5 GHz Signal Source Analyzer with Options B4 (OCXO, Low Aging/Improved Phase Noise at 10 Hz Carrier Offset), B21 (LO/IF Ports for External Mixers), B23 (20 dB Preamplifier to 26.5 GHz) and B25 (Electronic Attenuator, 0 dB to 30 dB). The list price for the FSUP26 with this option configuration is over $112,500 USD! It will arrive with a fresh calibration with full test data performed by Rohde & Schwarz!
The R&S FSUP26 Signal Source Analyzer combines the functionality of a high performance spectrum and signal analyzer with the advantages of a phase noise test system, all in a single box. The R&S FSUP26 is a unique and simple-to-use one-box solution for measuring oscillators and synthesizers in development and production applications. In addition, the Rohde & Schwarz FSUP26 leads to enormous cost reductions.
The Rohde and Schwarz FSUP26 analyzer is perfect for not only modern communications and broadcast systems, but also radar applications. Use the FSUP26 to measure phase noise and when characterizing oscillators, measure tuning slope, transient response, power, harmonics and spurious emissions, as well as amplifier noise. The integrated DC sources enable a wide range of additional measurements.
Features and specifications of FSUP26 include:
- Frequency range up to 26.5 GHz (up to 110 GHz with external mixers)
- Low Noise DC outputs for supply and tuning voltages
- Maximum flexibility for phase noise measurements
- Oscillator characterization
- Analysis of digital and analog modulated signals
Capabilities of the FSUP26 include:
- Phase detector method with internal/external reference
- Two-DUT method
- High sensitivity
- Automatic setting of all important parameters
- Easy operation
- Detection, suppression and listing of interference
- Measurement of reference points as a function of frequency
- Measurement of residual phase noise
- AM noise
Abbreviated specifications of the FSUP26:
- Operating Modes:
- Signal Source Analyzer: 1 MHz - 26.5 GHz
- Spectrum Analyzer: 20 Hz - 26.5 GHz
- Signal Source Analyzer
- Phase Noise Measurement:
- w/ Spectrum Analyzer: 10 MHz - 26.5 GHz
- w/ Phase Comparator: 1 MHz - 26.5 GHz
- internal reference: 1 MHz - 26.5 GHz
- external reference: 1 MHz - 8 GHz
- w/ Phase Comparator & Cross-Correlation: 1 MHz - 26 GHz
- Transient Measurement:
- min. frequency offset: 10 MHz
- max. frequency offset: 30 MHz
- Residual Noise w/ Phase Comparator: 1 MHz - 8 GHz
- AM Noise: 1 MHz - 8 GHz
- Sensitivity with internal reference and internal phase detector:
- Input level >+10 dBm, spurious and harmonics <–30 dBc, mode "averaged", +20 °C to +30 °C. LNA gain 40 dB, loop bandwidth =10 × frequency offset, max. 1 kHz. With the R&S Option B60 low phase noise Option B61 correlation extension option.
Installed Options:
B4 - OCXO, Low Aging/Improved Phase Noise at 10 Hz Carrier Offset
B21 - LO/IF Ports for External Mixers
B23 - 20 dB Preamplifier to 26.5 GHz
B25 - Electronic Attenuator, 0 dB to 30 dB
This unit is in excellent condition, has been fully tested and is guaranteed functional. It comes w/ a 14 day right of return should it not perform to your expectations. Please review pics and text carefully before bidding to verify accuracy of description. If you don't see it in the pictures, it is not included.
Insurance is included in UPS shipping charges. Item shipped internationally on buyer's UPS, FEDEX or DHL accounts only.
We will accept payment for this item by company check, cashier’s check and wire transfer only.
If you have zero feedback, contact us prior to purchase so we know you are a serious bidder. Otherwise, we may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction. Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed.
Please note that shipping and insurance costs are non-refundable.
Our feedback is very important to us and we strive for 100% positive on every transaction. If you are unsatisfied with any aspect of your transaction, please contact us before leaving negative or neutral feedback so that we can address and remedy the issue immediately. Additionally, we are always happy to leave positive feedback for our trading partners after a successful transaction.
Make sure that you check out our other auctions for more great deals on test and measurement equipment.
Thank you and good luck bidding.
Need your unit calibrated by an ISO 17025 accredited lab prior to shipment? Not a problem. We work with numerous calibration and repair companies that can provide your required service at competitive prices.
About Us
About Us
Payment
Shipping
Terms
Returns
About Us
Spaulding Surplus, LLC was established in 2002 and we pride ourselves on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around. Our equipment is sourced from a variety of manufacturers including Agilent/HP, Fluke, Tektronix, Rohde & Schwarz, LeCroy, Anritsu, Advantest, Aeroflex/IFR, ILX Lightwave, JDSU, Wavetek, etc. We are also dedicated to providing fair and competitive bids for your unused test equipment and excess inventory. WHY PAY MORE FOR THE SAME EQUIPMENT?
Payment
Payment
We accept payment by company check, bank transfer and Paypal (for items valued below $1500 USD). Payment must be received within 5 days of close of auction. Our mailing address is below and our bank info can be forwarded upon request. Spaulding Surplus
12829 Landale Street
Studio City, CA 91604.
Shipping
Shipping
All instruments are professionally packed and shipped via UPS GROUND with full insurance. We typically ship within the continental US only (please no PO Boxes) unless other arrangements have been made with the buyer. International customers may provide their UPS, DHL or FedEx account for international shipments. Items will be shipped within 7 business days of payment.
Terms
Terms
All items sold on Ebay come with a standard 30 day right of return warranty from the date of receipt, unless otherwise specified in the auction details. Payment in full is required prior to shipment. Buyers are required to notify us immediately if an instrument arrives damaged, and must keep all boxes and packing materials in case a UPS damage inspection is necessary. An extended warranty of 30 days is available for all direct purchases from Spaulding Surplus, LLC and established customers purchasing directly may qualify for net 30 payment terms with PO required prior to shipment.
Returns
Returns
All Ebay items can be returned for a full refund within 30 days of purchase should they not function as intended, unless they are being sold AS IS with known defects. Spaulding Surplus, LLC shall not be held liable for any damages resulting from buyer/operator negligence, or the improper use of its equipment, nor does it warrant their suitability for any specific application or project. The verification of product capability is the sole responsibility of the buyer. PO's and purchases cancelled due to insufficient instrument capability, buyer's remorse or loss of order are always subject to a 20% restocking fee. A complete evaluation is required for any instrument returned under warranty, and refunds are not issued until said evaluation has been completed by an ISO 17025 accredited calibration lab.
WE KINDLY REQUEST THAT BUYERS CONTACT US FIRST SHOULD THERE BE ANY PROBLEMS WITH THE ITEM PURCHASED, RATHER THAN FILING A "NOT AS DESCRIBED" CLAIM WITH BigCommerceOR IMMEDIATELY LEAVING NEGATIVE FEEDBACK. WE HAVE BEEN IN BUSINESS FOR OVER 15 YEARS AND ALWAYS STRIVE FOR PERFECT FEEDBACK AND INTEND TO PROVIDE QUALITY EQUIPMENT AND EXCELLENT CUSTOMER SERVICE TO ALL OF OUR CUSTOMERS. IF YOU EVER HAVE A PROBLEM WITH A TRANSACTION WE WILL MAKE IT RIGHT!
Helpful Links
Add to Favorite Sellers
Sign up to Newsletter
View Feedback
Contact Seller
Visit seller's BigCommerceShop
About Seller Page
Spaulding Surplus, LLC prides itself on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around.
More Items!
View more great items
Powered by Frooition
Frooition Frooition | No-js Template | BigCommercedesign, BigCommercestore design, BigCommerceshop design, BigCommercetemplate design, BigCommercelisting design (ver:froo_no_js)
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.
