Rohde Schwarz ESIB26 20 Hz - 26.5 GHz EMI Test Receiver w/ Opts B2/B4/B5 - CAL'D

Product Description

Seller refurbished

Seller refurbished

Powered by Frooition









Shop Categories
AmplifiersAnalyzersCable & Antenna AnalyzersCablesCalibration KitsCalibratorsCounters / TimersDetectorsEmulatorsError DetectorsLogic AnalyzersMetersModules / Plug InsMultimetersNetwork AnalyzersNoise GeneratorsNoise SourcesOpticalOptical Spectrum AnalyzersOscilloscopesOtherPattern GeneratorsPower MetersPower SensorsPower SuppliesProbesRF / MicrowaveService Monitors / Test SetsSignal AnalyzersSignal GeneratorsSpectrum AnalyzersThermal ImagersVXI

We buy, sell and rent general purpose, optical and RF test and measurement equipment. We pay top dollar for your unwanted, surplus or defective gear. Let us make you an offer on your new or used Agilent, Tektronix, Anritsu, Fluke, Rohde & Schwarz and IFR instruments.

Rohde & Schwarz ESIB26 20 Hz - 26.5 GHz EMI Test Receiver with Options B2/B4/B5 Installed - FRESH CAL!

Item Description

 Rohde & Schwarz ESIB26 20 Hz - 26.5 GHz EMI Test Receiver with Options B2/B4/B5 Installed - CALIBRATED!

You are bidding on a Rohde & Schwarz ESIB26 20 Hz - 26.5 GHz EMI Test Receiver with Options B2 (20 dB Preamplifier for EMI Test Receiver, ESIB26), B4 (OCXO 10 MHz and Low Phase Noise) and B5 (FFT-Filter / Bandwidth up to 1 kHz).  It will arrive with a fresh calibration performed by an ISO 17025 accredited lab! The R&S ESIB26 Test Receiver with this option configuration has a LIST PRICE OVER $130,000 USD!

The Rohde & Schwarz ESIB26 combines the high sensitivity, large dynamic range and selectivity of a high-end EMI test receiver with the flexibility and speed of a top-class spectrum analyzer. The R&S ESIB family of EMI test receivers fully comply with the basic standard CISPR 16-1-1 and carry out measurements in conformance with all civil and military EMI standards such as CISPR, EN, VDE, ANSI, FCC, BS, ETS, VCCI, MIL-STD, VG, DEF-STAN, etc.

The Rohde & Schwarz ESIB26 offers outstanding performance:

• Frequency range 20 Hz to 26.5 GHz
• Very high sensitivity (NF typ. 10 dB)
• Excellent large-signal immunity (1 dB comp.: +10 dBm)
• Low measurement uncertainty (< 1 dB up to 1 GHz)
• High measurement speed and result processing (min. meas. time 100 µs)
• Low inherent noise (<–3 dBµV)
  

Each R&S ESIB offers features and test routines for the various stages of product development as well as for the final EMC certification tests. The main users of the R&S ESIB are:

• EMC test houses and service providers
• Governmental organizations
• Safety standard authorities
• Military
• Large industrial development and EMC labs (e.g. automotive)
  

Features of the R&S ESIB26 EMI Receiver include:

• Fast scanning in test receiver mode and sweeping in spectrum analyzer mode
• Compliant with CISPR 16-1-1
• Two RF inputs Input 2 with additional pulse protection (20 Hz to 1 GHz)
• Integrated 20 dB preamplifier (selectable) 1 kHz to 7 GHz as standard; >7 GHz as option R&S ESIB-B2
• Preselection in receiver mode (fixed) and analyzer mode (selectable)
• Resolution bandwidths meeting MIL standards and CISPR 16 specifications in analyzer mode, -3 dB RBWs and -6 dB RBWs selectable
• Parallel detectors Peak, average, quasi-peak, CISPR average and RMS (max. four simultaneously)
• Automatic overload detection & autoranging
• Editors for user-definable transducer factors/sets and limit lines incl. integrated transducer factor/limit line libraries
• Internal test routines for automated or interactive preview & final measurements
• Evaluation functions for prescan, data reduction (peak list) and final measurement
• Split screen display (mixed analyzer/receiver mode) for detailed signal analysis
• Convenient scan table editor Up to ten subranges with individual parameter setting
• Automatic scan and display of traces in parallel (receiver mode) Max. four traces with up to 80.000 samples each (250.000 samples with one trace)
• Time-domain measurements (zero span) at up to 50 ns resolution for interference source analysis

Installed Options:


B2:  20 dB Preamplifier for EMI test receiver ESIB26
B4:  OCXO 10 MHz and Low Phase Noise
B5:  FFT-Filter / Bandwidth up to 1 kHz

Features:

• Frequency range 20 Hz to 7 GHz, 26.5 GHz or 40 GHz, depending on model
• Very high sensitivity (NF typ. 10 dB)
• Excellent large-signal immunity (1 dB comp.: +10 dBm)
• Low measurement uncertainty (< 1 dB up to 1 GHz)
• High measurement speed and result processing (min. meas. time 100 μs)
• Low inherent noise (<-3 dBµV)

This unit is in excellent condition, has been fully tested and is guaranteed functional. It comes with a fresh calibration and a 14 day right of return should it not perform to your expectations. Please review pics and text carefully before bidding to verify accuracy of description. If you don't see it in the pictures, it is not included.  Technical specifications above are provided for reference only.  Buyers are expected to do their own research to determine if the instrument's capabilities are sufficient for the applicable project.  We do not offer returns for equipment purchased in error.

Insurance is included in UPS shipping charges. Item shipped internationally on buyer's UPS, FEDEX or DHL accounts only.

We will accept payment for this item by company check, cashier’s check and wire transfer only.

If you have zero feedback, contact us prior to purchase so we know you are a serious bidder. Otherwise, we may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction. Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed.

Please note that shipping and insurance costs are non-refundable.

Our feedback is very important to us and we strive for 100% positive on every transaction. If you are unsatisfied with any aspect of your transaction, please contact us before leaving negative or neutral feedback so that we can address and remedy the issue immediately. Additionally, we are always happy to leave positive feedback for our trading partners after a successful transaction. 

Make sure that you check out our other auctions for more great deals on test and measurement equipment.
 

Thank you and good luck bidding.

Need your unit calibrated by an ISO 17025 accredited lab prior to shipment? Not a problem. We work with numerous calibration and repair companies that can provide your required service at competitive prices.