Keysight / Agilent N7788B Optical Component Analyzer with Options 022/032/400 - MFG CALIBRATED!
You are bidding on a Keysight / Agilent N7788B Optical Component Analyzer with Options 022 (Angled Laser Input Port), 032 (Angled DUT Port) and 400 (Component Analyzer, 1270nm to 1375nm and 1460nm to 1620nm). It will arrive with a current calibration and full test data performed by Keysight Technologies! Calibrated on March 25th, 2016 and valid thru March 25th, 2018 with no operating hours logged since it's last service!
The Keysight N7788B Component Analyzer uses proprietary technology to push the limits of today's optical technology. The Keysight N7788B is comparable with the well-known Jones-Matrix-Eigenanalysis (JME) which is the standard method for measuring Polarization Mode Dispersion (PMD) or differential group delay (DGD) of optical devices.
The new single scan technology from Keysight, offers a range of advantages to test a complete set of parameters including:
- DGD/ PMD
- PDL
- Power / Loss
- TE / TM-Loss
- 2nd-order PMD
- Principal States of Polarization (PSPs)
- Jones and Mueller Matrices
Features of the N7788B Optical Component Analyzer include:
- High throughput: A complete analysis across the C and the L band is performed in less than 10 seconds
- Software Drivers: A range of software drivers is available for external control of the system. This allows easy integration in common ERP systems.
- Remote control: Control of the instrument through LAN or via the Internet is supported. This supports automation as well as trouble shooting.
- Report Generation: Generating PDF reports is supported. The content including layout is configurable by the user.
- Real time power readout: High throughput measurement of non-connectorized components is supported by providing a real time power readout which enables fiber coupling of the new device.
- Barcode Scanner: Using Barcode scanner is supported for quick transfer of the DUT serial number.
Specifications of the Keysight N7788B include:
Wavelength (must select appropriate option at time of order):
- 1270 nm to 1375 nm (Opt. 300, O-Band)
- 1270 nm to 1375 nm, 1460 nm to 1620 nm (Opt. 400, O/C/L-Band)
- 1460 nm to 1620 nm (Opt. 500, C/L-Band)
- Operating wavelength range: 1260 nm to 1640 nm (SOP/DOP measurements are only possible outside the specification wavelength range if the user performs a manual calibration).
Differential group delay
- DGD uncertainty
- Resolution 2.0 nm ± (30 fs + 3.0% * DGD)
- Resolution 0.1 nm ± (30 fs + 3.0% * DGD)
- DGD measurement range 0 ps to 1000 ps
- PMD uncertainty ± (30 fs + 2.0% * DGD)
- PMD repeatability (typical) ± 3 fs
- PMD measurement range 0 ps to 300 ps
Loss
- PDL uncertainty
- 5 C-Band ± (0.05 dB + 4% * PDL)
- O-Band ± (0.10 dB + 4% * PDL)
- PDL repeatability (typical) ± 0.005 dB
- Insertion loss uncertainty (typical)
- C/L-Band ± 0.03 dB
- O-Band ± 0.07 dB
- Insertion loss dynamic range (typical) > 41 dB (for higher TLS power levels, increase value accordingly)
Polarization analysis
- SOP uncertainty (typical) 1.5°
- DOP uncertainty ± 2.0 %
- DOP uncertainty after user calibration (typical) ± 0.5 %
- Maximum sampling rate 1 MHz
Optical power measurement
- Relative power uncertainty
- C/L-Band: ± -.03 dB (± 0.02 dB typical)
- O-Band: ± 0.07 dB (± 0.04 dB typical)
- Input power range -50 dBm to +7 dBm
- Maximum safe optical input power +12 dBm
Polarization control
- SOP switching time < 10 ?s
- PDL (typical)
- C/L-Band < 0.2 dB
- O-Band < 0.5 dB
- Insertion loss < 3.5 dB (< 3 dB, typical)
- Maximum safe input power +20 dBm
You can view the specs for this unit here: Product Specs
This unit is in excellent condition, has been fully tested and is guaranteed functional. It comes w/ a 14 day right of return should it not perform to your expectations. Please review pics and text carefully before bidding to verify accuracy of description. If you don't see it in the pictures, it is not included.
Insurance is included in UPS shipping charges.
Item shipped internationally on buyer's UPS, FEDEX or DHL accounts only.We will accept payment for this item by company check, cashier’s check and wire transfer only.
Feel free to send any questions regarding this item to:
(in fact I encourage you to do so)
If you have zero feedback,
contact us prior to purchase so we know you are a serious bidder. Otherwise, we may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction.
Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed.
Please note that shipping and insurance costs are non-refundable.
Our feedback is very important to us and we strive for 100% positive on every transaction. If you are unsatisfied with any aspect of your transaction, please contact us before leaving negative or neutral feedback so that we can address and remedy the issue immediately. Additionally, we are always happy to leave positive feedback for our trading partners after a successful transaction.
Make sure that you check out
my other auctions for great deals on other test and measurement equipment.
Thank you and good luck bidding.
