Keysight Agilent N5230C 300 kHz - 20 GHz Vector Network Analyzer w/ Opts 010/245

$42,500.00
(No reviews yet) Write a Review
SKU:
253856492852
Condition:
Refurbished
MPN:
N5230C
Network Analyzer Type:
Vector
Brand:
Keysight
Keysight Agilent N5230C 300 kHz - 20 GHz Vector Network Analyzer w/ Opts 010/245

Product Description

Seller refurbished

Seller refurbished

 
 

Keysight N5230C 20 GHz Vector Network Analyzer with Options 010 & 245 - CALIBRATED!

 
Item Description

Keysight / Agilent 300 kHz - 20 GHz Vector Network Analyzer with Options 010 & 245 - CALIBRATED!

 


You are bidding on a Keysight/Agilent N5230C 300 kHz to 20 GHz PNA-L Microwave Vector Network Analyzer with Options 010 (Time Domain Analysis) and 245 (300 kHz to 20 GHz, 4 port, Configurable Test Set and Extended Power Range).  It will arrive with a fresh calibration with full test data performed by Keysight Technologies!

 

Installed Options:

  • 010 - Time Domain Analysis
  • 245 - 300 kHz to 20 GHz, 4 port, Configurable Test Set and Extended Power Range

Features of the Keysight (Agilent) N5230C:

  • 300 kHz to 6/13.5/20 GHz and 10 MHz to 20/40/50 GHz
  • 2- or 4- ports with two built-in sources
  • 110 dB system and 122 dB receiver dynamic range, 32,001 points, 32 channels
  • < .006 dB rms (Option 22x)
  • Measurement speed: 4 to 9 µs per point 

Capabilities of the Keysight (Agilent) N5230C:

  • Mixer Measurements:
    • Conversion loss/gain, magnitude and phase
    • Input match, output match, and LO match
    • Isolation and compression
    • The two internal independent synthesizers with +13 dBm power and < 60 dBc harmonics eliminate the need for external synthesizers or components.
    • Advanced error correction
    • Patented vector-mixer calibration for measurement of absolute group delay
    • Scalar-mixer calibration (SMC) for match-corrected amplitude measurements
    • Signiicantly faster speed for ixed-IF (20 to 30 times faster than with an external source)
    • Easy-to-conigure multi-stage converter measurements
    • LO source control and LO power calibration
    • Mixer IMD
    • The simple two-step SMC calibration provides match-corrected conversion loss, error-corrected input and output match
    • Software tuning for embedded LO
  • Amplifier Measurements:
    • Gain, gain latness, reverse isolation, and return loss
    • Simple, fast, and accurate AM-AM and AM-PM compression measurements with the Gain Compression Application with 38 dB power sweep range at 20 GHz, +13 dBm output power
    • Test harmonics accurately with < 60 dBc source harmonics. No need for external filters.
    • Accurate and simple IMD using the dual sources and internal combiner, located behind the couplers, providing highly accurate and stable measurements. No need for external combiners.
    • Source corrected noise igure measurements with exceptional accuracy
    • Integrated source attenuators and receiver attenuators for measurement optimization
    • Perform all of the above measurements with one single connection using the PNA–X.
  • Pulsed-RF Measurements:
    • Wideband and narrowband detection
    • Up to four internal pulse generators
    • Up to two internal pulse modulators
    • Pulse widths as narrow as 33 ns
    • Pulse-to-pulse
    • Point-in-pulse, average pulse, and pulse-proile capability
    • No need for external components
  • Basic Measurements:
    • Insertion loss, gain, return loss, isolation, group delay, compression, both magnitude and phase
    • Connectorized, in-fixture, or on-wafer
    • Fast and accurate
    • Reliable and repeatable
    • Affordable
  • On-wafer Measurements:
    • Class of TRL calibrations for accurate measurements
    • Differential measurement capabilities with integrated multiport network analyzers
    • Accurate power control and de-embedding algorithm for device characterization
    • Compatibility with on-wafer calibration software for a total solution
  • Differential Measurements:
    • Single-ended, balanced, mixed-mode
    • S-parameters
    • Ratioed and unratioed measurements
    • Mode-conversion analysis
    • True-mode stimulus measurements
  • Multiport Measurements:
    • Multiport configurations optimized for your device, including full cross-bar
    • Quick-Short-Open-Load-Thru (QSOLT) for fast, multiport cal
    • N-port calibration for accuracy and ease-of-measurements
    • Test-set control part of PNA firmware
    • 32 independent channels for fast measurement speed


This unit is in excellent condition, has been fully tested and is guaranteed functional. It comes with a fresh calibration and a 14 day right of return should it not perform to your expectations. Please review pics and text carefully before bidding to verify accuracy of description. If you don't see it in the pictures, it is not included.  Also, please note that the technical specifications provided are for reference only.  It is the bidder's responsibility to research the capabilities of the instruments they are buying.

Insurance is included in UPS shipping charges. Item shipped internationally on buyer's UPS, FEDEX or DHL accounts only.

We will accept payment for this item by company check, cashier’s check and wire transfer only.

If you have zero feedback, contact us prior to purchase so we know you are a serious bidder. Otherwise, we may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction. Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed.

Please note that shipping and insurance costs are non-refundable.

Our feedback is very important to us and we strive for 100% positive on every transaction. If you are unsatisfied with any aspect of your transaction, please contact us before leaving negative or neutral feedback so that we can address and remedy the issue immediately. Additionally, we are always happy to leave positive feedback for our trading partners after a successful transaction.



Make sure that you check out our other auctions for more great deals on test and measurement equipment.

 

Thank you and good luck bidding.
 

 

 





 photo 58cfed58-665b-43bf-b2ad-c85cc519559b_zpsoeuxqicw.jpg    

 photo 826d7156-db66-416e-8d25-e88f35affc6b_zpsfpzialxn.jpg 
 

Need your unit calibrated by an ISO 17025 accredited lab prior to shipment? Not a problem. We work with numerous calibration and repair companies that can provide your required service at competitive prices.

About Us

Spaulding Surplus, LLC was established in 2002 and we pride ourselves on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around. Our equipment is sourced from a variety of manufacturers including Agilent/HP, Fluke, Tektronix, Rohde & Schwarz, LeCroy, Anritsu, Advantest, Aeroflex/IFR, ILX Lightwave, JDSU, Wavetek, etc. We are also dedicated to providing fair and competitive bids for your unused test equipment and excess inventory. WHY PAY MORE FOR THE SAME EQUIPMENT?
 

Payment

We accept payment by company check, bank transfer and Paypal (for items valued below $1500 USD). Payment must be received within 5 days of close of auction. Our mailing address is below and our bank info can be forwarded upon request.  Spaulding Surplus 12829 Landale Street Studio City, CA 91604.
 

Shipping

All instruments are professionally packed and shipped via UPS GROUND with full insurance. We typically ship within the continental US only (please no PO Boxes) unless other arrangements have been made with the buyer. International customers may provide their UPS, DHL or FedEx account for international shipments. Items will be shipped within 7 business days of payment. 
 

Terms

All items sold on Ebay come with a standard 14 day right of return warranty from the date of receipt, unless otherwise specified in the auction details. Payment in full is required prior to shipment. Buyers are required to notify us immediately if an instrument arrives damaged, and must keep all boxes and packing materials in case a UPS damage inspection is necessary. An extended warranty of 30 days is available for all direct purchases from Spaulding Surplus, LLC and established customers purchasing directly may qualify for net 30 payment terms with PO required prior to shipment. A complete list of our company terms and conditions can be accessed thru the link below. Spaulding Surplus, LLC Terms & Conditions 


Returns

Spaulding Surplus typically offers a 14 day right of return for equipment received damaged or non-functional.  However, Spaulding Surplus, LLC shall not be held liable for any damages resulting from buyer/operator negligence, or the improper use of its equipment, nor does it warrant their suitability for any specific application or project.  The verification of product capability is the sole responsibility of the buyer.  PO’s and purchases cancelled due to insufficient instrument capability, buyer’s remorse or loss of order are always subject to a minimum 20% restocking fee.  A complete evaluation is required for any instrument returned under warranty, and refunds are not issued until said evaluation has been completed by an ISO 17025 accredited calibration lab. 


 

Spaulding Surplus, LLC prides itself on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around.

 
More Items!
Powered by Frooition
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.