Keysight / Agilent N2802A 25 GHz InfiniiMax III Series Probe Amplifier - CAL'D

$15,950.00

(No reviews yet) Write a Review

SKU:: 253850289488
Condition:: Refurbished
Brand:: Keysight / Agilent
Model:: N2802A
MPN:: N2802A
Type:: High Frequency/RF Probe

Keysight / Agilent N2802A 25 GHz InfiniiMax III Series Probe Amplifier - CAL'D

Current Stock:

Quantity:

Product Description

Seller refurbished

Shop Categories

All Categories

We buy, sell and rent general purpose, optical and RF test and measurement equipment. We pay top dollar for your unwanted, surplus or defective gear. Let us make you an offer on your new or used Agilent, Tektronix, Anritsu, Fluke, Rohde & Schwarz and IFR instruments.

Keysight / Agilent N2802A 25 GHz InfiniiMax III Series Probe Amplifier - CAL'D

Item Description

Keysight / Agilent N2802A 25 GHz InfiniiMax III Series Probe Amplifier - CALIBRATED!

You are bidding on a Keysight / Agilent N2802A 25 GHz InfiniiMax III Series Probe Amplifier with all standard accessories shown. It will arrive with a fresh calibration performed by Keysight Technologies. The InfiniiMax III probing system provides the highest bandwidth and incredibly low loading to allow for a completely new level of signal fidelity and accuracy. Four different InfiniiMax III probe amplifiers ranging from 16 GHz to 30 GHz are available for matching your probing solution to your performance and budget requirements. A proprietary 200 GHz fT InP (indium phosphide) IC process with backside ground vias and novel thick film technology is utilized for the InfiniiMax III probe system to accommodate your highest performance needs and is unmatched by any product in the market.

Features:

Full 25 GHz to the probe tip

Industry's lowest probe and scope system noise

Industry's highest fidelity and accuracy due to bandwidth and extremely low loading

Probe amplifiers loaded with measured s-parameters for more accurate response correction

Probe bandwidth upgradable

Variety of probe heads for different use models with maximum usability

Bandwidth:

25 GHz

Tr = 17.4 psec

Range:

DC attenuation ratio : 6:1 (3:1 with 200 ZIF tip)

Input voltage range : 1.6 Vpp (0.8 Vpp with 200 ZIF tip)

Input common mode range : ±12 V at DC to 250 Hz, ±2.5 V at >250 Hz (±6 V at DC to 250 Hz, ±1.25 V at >250 Hz with 200 ? ZIF tip)

Offset range : ±16 V when probing a single-ended signal

Input Impedance:

DC input resistance : R diff = 100 k ±2%, R se = 50 k ±2%

Input resistance @ >10 kHz : R diff = 1 k, R se = 500

Input capacitance : C diff = 32 fF, C se = 48 fF (with ZIF probe head)

Connectivity:

N5445A InfiniiMax III browser

N5439A InfiniiMax III ZIF probe head

N5444A InfiniiMax III 2.92 mm/3.5 mm/SMA probe head

N5441A InfiniiMax III solder-in probe head

This unit is in excellent condition, has been fully tested and is guaranteed functional. It comes w/ a 14 day right of return should it not perform to your expectations. Please review pics and text carefully before bidding to verify accuracy of description. If you don't see it in the pictures, it is not included.

Insurance is included in UPS shipping charges. Item shipped internationally on buyer's UPS, FEDEX or DHL accounts only.

We will accept payment for this item by company check, cashier’s check and wire transfer only.

Feel free to send any questions regarding this item to:

(in fact I encourage you to do so)

If you have zero feedback, contact us prior to purchase so we know you are a serious bidder. Otherwise, we may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction. Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed.

Please note that shipping and insurance costs are non-refundable.

Our feedback is very important to us and we strive for 100% positive on every transaction. If you are unsatisfied with any aspect of your transaction, please contact us before leaving negative or neutral feedback so that we can address and remedy the issue immediately. Additionally, we are always happy to leave positive feedback for our trading partners after a successful transaction.

Make sure that you check out my other auctions for great deals on other test and measurement equipment.

Thank you and good luck bidding.

Need your unit calibrated by an ISO 17025 accredited lab prior to shipment? Not a problem. We work with numerous calibration and repair companies that can provide your required service at competitive prices.