Keysight / Agilent 86115D 20/34 GHz High-Volume Optical Transceiver Test Module w/ Option 004 - CALIBRATED!
You are bidding on a Keysight / Agilent 86115D 20/34 GHz High-Volume/Parallel Optical Transceiver Test Module with Option 004 (Quad input 20GHz optical sampling module 750-1650nm for SM and MM fiber). It will arrive with a fresh calibration performed by an ISO 17025 accredited lab. The Keysight 86115D with Option 004 has a current list price of 100K!
The 86115D is the ideal solution for high volume waveform analysis of transceivers operating at 8.5 Gb/s (8X Fibre Channel), 9.953 Gb/s (OC-192/STM-64), 10.3125 Gb/s (10 Gb Ethernet), 10.52 Gb/s (10X Fibre Channel), and 14.025 Gb/s (16X Fibre Channel) rates. The integrated optical receiver has an unfiltered bandwidth of 20 GHz. Option 282 provides a 34 GHz optical channel to allow compliance testing at 25.78 Gb/s (100 Gb Ethernet), 29.75 Gb/s (OTU4), and 28.05 Gb/s (32x Fibre Channel). A well-designed magnitude and phase response provides high-fidelity waveforms and accurate analysis of high-speed laser designs. Switchable reference receiver capability is available for eye-mask compliance testing at the rates mentioned above. The optical channel uses a broad wavelength photodetector operating from 750 to 1650 nm. The 62.5/125 µm connector is compatible with both multimode and single-mode fibers.
By integrating very high quality, low insertion loss optical switches, the 86115D can be expanded to 4 ports1 (option 004). These switches have been tested to over one billion switch cycles, with no signal degradation. Mode fidelity is preserved through the switch.
Option 004 provides an accurate and economical method to observe up to four transmitters in test schemes where sequential acquisition of waveforms is appropriate. For example, it is common to test many transceivers simultaneously in a temperature chamber. Test time is dominated by thermal ramp cycles. With two 86115D-004 modules, four transmitters can be simultaneously measured in one series of waveform acquisitions. The switches are then actuated and the second set of four transmitters are measured. In the time it normally takes to measure two transmitters, eight transmitters can be characterized. Only one 86100C/D2 oscilloscope mainframe is required! Finally, an integrated rather than an external switch provides a convenient and fully calibrated measurement path as the switch insertion loss is integral to the oscilloscope channel.
Key Features and Functions
- 20 or 34 GHz bandwidth, 750-1650 nm, for 8 to 28 Gb/s transceiver test
- Get reduced cost options for 8.5 to 11.3 Gb/s rates alone or 14.025 Gb/s alone
- Test a wavelength range of 750-1650 nm with 62.5 um input
- See better representations of your signals with characteristic RMS noise of 5 µW (10 Gb/s receiver), 8 µW (16xFC receiver), and 12 µW (25 Gb/s receiver)
- Option 004 provides an accurate and economical method to observe up to four transmitters in test schemes where sequential acquisition of waveforms is appropriate
You can view the specs for this unit here: Data Sheet
This unit is in excellent condition, has been fully tested and is guaranteed functional. It comes w/ a 14 day right of return should it not perform to your expectations. Please review pics and text carefully before bidding to verify accuracy of description. If you don't see it in the pictures, it is not included.
Insurance is included in UPS shipping charges.
Item shipped internationally on buyer's UPS, FEDEX or DHL accounts only.We will accept payment for this item by company check, cashier’s check and wire transfer only.
Feel free to send any questions regarding this item to:
(in fact I encourage you to do so)
If you have zero feedback,
contact us prior to purchase so we know you are a serious bidder. Otherwise, we may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction.
Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed.
Please note that shipping and insurance costs are non-refundable.
Our feedback is very important to us and we strive for 100% positive on every transaction. If you are unsatisfied with any aspect of your transaction, please contact us before leaving negative or neutral feedback so that we can address and remedy the issue immediately. Additionally, we are always happy to leave positive feedback for our trading partners after a successful transaction.
Make sure that you check out
my other auctions for great deals on other test and measurement equipment.
Thank you and good luck bidding.
