We buy, sell and rent general purpose, optical and RF test and measurement equipment. We pay top dollar for your unwanted, surplus or defective gear. Let us make you an offer on your new or used Agilent, Tektronix, Anritsu, Fluke, Rohde & Schwarz and IFR instruments.
Anritsu MT1000A Network Master Pro Test Set / OTDR - LOADED & MFG CALIBRATED!
Anritsu MT1000A Network Master Pro Test Set / OTDR - LOADED & ANRITSU CALIBRATED!
You are bidding on an Anritsu MT1000A Network Master Pro Test Set / OTDR. This system will arrive with a fresh calibration / conformance certificate provided by the manufacturer.
The compact, battery-powered and easy-to-use Anritsu MT1000A provides everything needed to install and maintain communication networks in a rugged, field portable package. This lightweight instrument simplifies the daunting task of collecting and interpreting data with an easy-to-use GUI and clear summaries allowing users of any skill level to operate the instrument to its full potential.
INSTALLED OPTIONS:
MT1000A: Network Master Pro Mainframe - $3654.00
MT1000A-003: MT1000A WLAN/Bluetooth Connectivity - $74.00
MU100021A: OTDR Module 1310/1550/850/1300nm SMF/MMF - $817.00
MU100021A-002: Visual Fault Locator - $578.00
MU100021A-010: UPC Polish - $105.00
MU100021A-021: Enhanced Dynamic Range - $9681.00
MU100010A: Base transport module featuring the following interfaces: 2 x RJ48; 2 x BNC Tx/Rx; 2 x Bantam Tx/Rx; 2 x RJ45; 2 x SFP+. Note module requires protocol option(s) to enable test functionality - $4221
MU100010A-001: Dual channel SDH; SONET; PDH; DSn; Ethernet option up to 2.7G for MU100010A - Ethernet features include: IPv4/IPv6; Y.1564; RFC 2544; BER; Multi-stream; OAM; SyncE; MPLS; MPLS-TP; Stacked VLAN; PBB-TE; Ping/Traceroute; Cable test. SONET/SDH features includes PDH/DSn testing; Bi-directional monitoring/mapping; Error/Alarm; Performance Delay/APS measurement; Header onitoring/generation; Pointer event generation; Trouble scan; Channel statistics; Frame capture - $4043.00
MU100010A-011: Single channel 10G Ethernet option for MU100010A - includes IPv4/IPv6; Y.1564; RFC 2544; BER; Multi-stream; OAM; SyncE; MPLS; MPLS-TP; Stacked VLAN; PBB-TE; Ping/Traceroute; Cable test - $5300.00
MU100010A-020: RFC 6349 option for MU100010A - provides dual port TCP throughput testing up to 10G based on the RFC6349 standard. Up to 16 TCP sessions can be tested simultaneously as well as connectivity testing to iperf server by emulating iperf client - $5880.00
MU100010A-071: Dual channel CPRI /OBSAI option up to 5G (CPRI rate options 1-5)for MU100010A - provides L1/L2 testing; alarm/error detection; unframed/framed BER; RTD and transceiver information - $1607.00
MU100010A-072: Single channel CPRI/OBSAI option from 6G to 10.137G (CPRI rate options 6-8) for MU100010A - provides L1/L2 testing; alarm/error detection; unframed/framed BER; RTD and transceiver information - $6983.00
G0306B: Video Inspection Probe - $1575.00
F1ADPTLITA Adapter Kit
Accessories Included: Line Cord; Stylus; AC charger; Operation Manual on DVD; Li-ion Battery; MT1000A/MU100010A Quick Reference Guide; Soft Bag; Carrying Strap; ESD Box for optical modules; support for connector inspection microscope (VIP).
The MT1000A is multi-function tester that can be configured with an array of transport testing functions and OTDR modules to ensure you have the tools you need today plus the expandability for future technologies – all of which are field upgradeable.
Features:
The MT1000A transport module provides robust Ethernet/IP client service verification using industry recognized benchmark test applications driven by IEEE, MEF & ITU-T standards bodies in an intuitive, easy to use graphic interface. It supports both electrical and optical Ethernet/IP industry standard interfaces from 10Mbps to 100Gbps in a scalable platform configured to your network requirements. The Network Master can generate, monitor, capture and report a variety of Ethernet/IP Client services including voice, data and video services. Also supported are Ethernet, IP, MPLS and PBB-TE packet transport as well as circuit based transport. The Network Master enables you to deliver confidence in your Ethernet/IP client service performance as your network grows and evolves with your business demands.
This unit is in excellent condition, has been fully tested and is guaranteed functional. It comes w/ a 14 day right of return should it not perform to your expectations. Please review pics and text carefully before bidding to verify accuracy of description. If you don't see it in the pictures, it is not included.
Insurance is included in UPS shipping charges. Item shipped internationally on buyer's UPS, FEDEX or DHL accounts only.
We will accept payment for this item by company check, cashier’s check and wire transfer only.
If you have zero feedback, contact us prior to purchase so we know you are a serious bidder. Otherwise, we may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction. Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed.
Please note that shipping and insurance costs are non-refundable.
Our feedback is very important to us and we strive for 100% positive on every transaction. If you are unsatisfied with any aspect of your transaction, please contact us before leaving negative or neutral feedback so that we can address and remedy the issue immediately. Additionally, we are always happy to leave positive feedback for our trading partners after a successful transaction.
Make sure that you check out our other auctions for more great deals on test and measurement equipment.
Thank you and good luck bidding.
Need your unit calibrated by an ISO 17025 accredited lab prior to shipment? Not a problem. We work with numerous calibration and repair companies that can provide your required service at competitive prices.
Spaulding Surplus, LLC was established in 2002 and we pride ourselves on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around. Our equipment is sourced from a variety of manufacturers including Agilent/HP, Fluke, Tektronix, Rohde & Schwarz, LeCroy, Anritsu, Advantest, Aeroflex/IFR, ILX Lightwave, JDSU, Wavetek, etc. We are also dedicated to providing fair and competitive bids for your unused test equipment and excess inventory. WHY PAY MORE FOR THE SAME EQUIPMENT?
We accept payment by company check, bank transfer and Paypal (for items valued below $1500 USD). Payment must be received within 5 days of close of auction. Our mailing address is below and our bank info can be forwarded upon request. Spaulding Surplus 12829 Landale Street Studio City, CA 91604.
All instruments are professionally packed and shipped via UPS GROUND with full insurance. We typically ship within the continental US only (please no PO Boxes) unless other arrangements have been made with the buyer. International customers may provide their UPS, DHL or FedEx account for international shipments. Items will be shipped within 7 business days of payment.
All items sold on Ebay come with a standard 14 day right of return warranty from the date of receipt, unless otherwise specified in the auction details. Payment in full is required prior to shipment. Buyers are required to notify us immediately if an instrument arrives damaged, and must keep all boxes and packing materials in case a UPS damage inspection is necessary. An extended warranty of 30 days is available for all direct purchases from Spaulding Surplus, LLC and established customers purchasing directly may qualify for net 30 payment terms with PO required prior to shipment. A complete list of our company terms and conditions can be accessed thru the link below. Spaulding Surplus, LLC Terms & Conditions
Spaulding Surplus typically offers a 14 day right of return for equipment received damaged or non-functional. However, Spaulding Surplus, LLC shall not be held liable for any damages resulting from buyer/operator negligence, or the improper use of its equipment, nor does it warrant their suitability for any specific application or project. The verification of product capability is the sole responsibility of the buyer. PO’s and purchases cancelled due to insufficient instrument capability, buyer’s remorse or loss of order are always subject to a minimum 20% restocking fee. A complete evaluation is required for any instrument returned under warranty, and refunds are not issued until said evaluation has been completed by an ISO 17025 accredited calibration lab.
Spaulding Surplus, LLC prides itself on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around.
