Anritsu MS2724C 9kHz - 20GHz Handheld Spectrum Analyzer - LOADED & CALIBRATED!

$13,950.00

(No reviews yet) Write a Review

SKU:: 253850457493
Condition:: Refurbished
Brand:: Anritsu
MPN:: MS2724C
Analyzer Type:: Spectrum Analyzers
Unit Type:: Complete Systems & Mainframes

Anritsu MS2724C 9kHz - 20GHz Handheld Spectrum Analyzer - LOADED & CALIBRATED!

Current Stock:

Quantity:

Product Description

Seller refurbished

Shop Categories

All Categories

We buy, sell and rent general purpose, optical and RF test and measurement equipment. We pay top dollar for your unwanted, surplus or defective gear. Let us make you an offer on your new or used Agilent, Tektronix, Anritsu, Fluke, Rohde & Schwarz and IFR instruments.

Anritsu MS2724C 9kHz - 20GHz Handheld Spectrum Analyzer - LOADED & CALIBRATED!

Item Description

Anritsu MS2724C 9kHz - 20GHz Spectrum Analyzer with Options 9/25/31/35/44/65/541/542/543/546 - CALIBRATED!

You are bidding on an Anritsu MS2724C 9 kHz to 20 GHz Handheld Spectrum Analyzer with Options 9 (I/Q Demodulation Hardware), 25 (Interference Analyzer), 31 (GPS Receiver), 35 (W-CDMA/HSPA+ Over-the-Air (OTA) Measurements), 44 (W-CDMA/HSPA+ RF Measurements), 65 (W-CDMA/HSPA+ Demodulation), 541 (LTE RF Measurments), 542 (LTE Modulation Measurements), 543 (15 MHz and 20 MHz LTE Modulation Measurements) and 546 (LTE Over-the-Air (OTA) Measurements). This unit is will arrive with a fresh calibration performed by an ISO 17025 accredited lab. The Anritsu MS2724C high performance handheld spectrum analyzer provides the wireless professional the performance needed for the most demanding measurements in harsh RF and physical environments. Whether it is for spectrum monitoring, broadcast proofing, interference analysis, RF and microwave measurements, regulatory compliance, or Wi-Fi and wireless network measurements, the Spectrum Master is the ideal instrument for making fast and reliable measurements.

Spectrum and Interference Analyzer Highlights

Measure: Occupied Bandwidth, Channel Power, ACPR, C/I
Interference Analyzer: Spectrogram, Signal Strength, RSSI
Dynamic Range: > 104 dB in 1 Hz RBW
DANL: ?160 dBm in 1 Hz RBW
Phase Noise: ?100 dBc/Hz @ 10 kHz offset at 1 GHz
Frequency Accuracy: ±25 ppb with GPS On
1 Hz to 10 MHz Resolution Bandwidth (RBW)
Traces: Normal, Max Hold, Min Hold, Average, # of Averages
Detectors: Peak, Negative, Sample, Quasi-peak, and true RMS
Markers: 6, each with a Delta Marker, or 1 Reference with 6 Deltas
Limit Lines: up to 40 segments with one-button envelope creation
Trace Save-on-Event: crossing limit line or sweep complete

Capabilities and Functional Highlights

LTE, TD-LTE
GSM/EDGE
W-CDMA/HSPA+
TD-SCDMA/HSPA+
CDMA, EV-DO
Fixed, Mobile WiMAX
AM/FM/SSB Demodulator
Zero-span IF Output
Gated Sweep
GPS tagging of stored traces
Internal Preamplifier standard
High Accuracy Power Meter
4, 6, 8, 18, 26 GHz USB Sensors
Channel Scanner
8.4 inch Display
Burst Detect
< 5 minute warm-up time
2.5 hour battery operation time
Ethernet/USB Data Transfer
MST Remote Access Tool

You can view the specs for this unit here: MS2724C Specs

This unit is in excellent condition, has been fully tested and is guaranteed functional. It comes w/ a 14 day right of return should it not perform to your expectations. Please review pics and text carefully before bidding to verify accuracy of description. If you don't see it in the pictures, it is not included.

Insurance is included in UPS shipping charges. Item shipped internationally on buyer's UPS, FEDEX or DHL accounts only.

We will accept payment for this item by company check, cashier’s check and wire transfer only.

Feel free to send any questions regarding this item to:

(in fact I encourage you to do so)

If you have zero feedback, contact us prior to purchase so we know you are a serious bidder. Otherwise, we may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction. Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed.

Please note that shipping and insurance costs are non-refundable.

Our feedback is very important to us and we strive for 100% positive on every transaction. If you are unsatisfied with any aspect of your transaction, please contact us before leaving negative or neutral feedback so that we can address and remedy the issue immediately. Additionally, we are always happy to leave positive feedback for our trading partners after a successful transaction.

Make sure that you check out my other auctions for great deals on other test and measurement equipment.

Thank you and good luck bidding.

Need your unit calibrated by an ISO 17025 accredited lab prior to shipment? Not a problem. We work with numerous calibration and repair companies that can provide your required service at competitive prices.