Anritsu MS2691A 50Hz - 13.5GHz Vector Signal Analyzer Generator - LOADED & CAL'D!

$14,500.00
(No reviews yet) Write a Review
SKU:
274620460428
Condition:
Used
Brand:
Anritsu
MPN:
MS2691A
Anritsu MS2691A 50Hz - 13.5GHz Vector Signal Analyzer Generator - LOADED & CAL'D!

Product Description

 
 

Anritsu MS2691A 50 Hz - 13.5 GHz Vector Signal Analyzer / Generator - LOADED!

 
Item Description

Anritsu MS2691A 50 Hz - 13.5 GHz Vector Signal Analyzer / Generator - CALIBRATED!

You are bidding on an Anritsu MS2691A 50 Hz - 13.5 GHz Vector Signal Analyzer / Generator that is loaded with software and hardware options (see below).  This unit will arrive with a fresh calibration performed by an ISO 17025 accredited lab!

 
The Signal Analyzer MS2690A/MS2691A/MS2692A (MS269xA) has the excellent general level accuracy, dynamic range and performance of a high-end spectrum analyzer.  Its easy operability and built-in functions are perfect for tests of Tx characteristics. Not only can it capture wideband signals but FFT technology supports multifunction signal analyses in both the time and frequency domains. Behavior in the time domain that cannot be handled by a sweep type spectrum analyzer can be checked in the frequency domain. A wide frequency can be analyzed using sweep type spectrum analysis functions while detailed signal analysis of a specific frequency band is supported too. Moreover, the built-in signal generator function outputs both continuous wave (CW) and modulated signals for use as a reference signal source when testing Tx characteristics of parts and as a signal source for evaluating Rx characteristics.

 
Hardware Options Installed:

 
103: Extends Lower Limit of Pre-Selector to 3 GHz
108: 6 GHz Preamplifier (100 kHz to 6 GHz)

 
Software Options Installed:

 
MX269000A: Spectrum Analyzer / Signal Analyzer / Phase Noise / Recreate / Power Meter
MX269017A: Vector Modulation Analysis Software
MX269020A: LTE Dowlink Measurement Software
MX269024A: CDMA Forward Link Measurment Software
MX269026A: EV-DO Forward Link Measurment Software
MX269030A: W-CDMA BS Measurement Software


Anritsu MS2691A Features:

Frequency Range: 50 Hz to 13.5 GHz
Analysis Bandwidth: 31.25 MHz (Standard), 62.5 MHz / 125 MHz (Option)
One-Box Tester with the addition of the Signal Generator option
Batch Capture Measurements for the fastest analysis time

The Anritsu MS2691A Signal Analyzer is the latest high performance signal analyzer for next-generation communication applications. The Anritsu MS2691A Signal Analyzer base units include swept spectrum analysis, FFT signal analysis, and a precision digitizer function. Add options to incorporate a Signal Generator, to turn the instrument into a hassle free, plug and play, one box solution.

The Anritsu MS2691A Signal Analyzer supports a standard analysis bandwidth of 31.25 MHz that can be extended to 62.5 MHz /125 MHz with optional hardware. Using a patented calibration process, the multipoint amplitude calibration and the phase calibration result in a level accuracy of ±0.5 dB across a 6 GHz span. No other analyzer on the market can meet that specification! These boxes are superlative in every way -- they measure the widest signals and using the latest technology, make measurements faster than ever before. The modular architecture ensures a box that grows as measurement requirements change. A series of options enables standards-based modulation analysis, vector signal generation, and BER measurement. The end-user can configure a one-box solution that dramatically reduces cost, footprint, and Total Average Cycle Time (TACT) for device evaluation.

The Anritsu MS2691A Signal Analyzers are accurate enough for the most demanding R&D environment, yet are fast enough for the factory floor! Currently supported applications include GSM, GPRS, EDGE, W-CDMA, mobile WiMAX, and LTE. The wideband FFT signal analyzer (analysis bandwidth of 31.25 MHz with option for 62.5 MHz /125 MHz) supports high-speed continuous measurements including CCDF, frequency vs. time, spectrum, and power vs. time analysis. The standard digitizing function can capture waveforms and immediately play them out using the optional Signal Generator. An extended digitizer option adds the ability to capture signals up to 20 MHz wide for up to 4 hours.
 

This unit is in excellent condition, has been fully tested and is guaranteed functional. It comes w/ a 14 day right of return should it not perform to your expectations. Please review pics and text carefully before bidding to verify accuracy of description. If you don't see it in the pictures, it is not included.

Insurance is included in UPS shipping charges. Item shipped internationally on buyer's UPS, FEDEX or DHL accounts only.

We will accept payment for this item by company check, cashier’s check and wire transfer only. 

If you have zero feedback, contact us prior to purchase so we know you are a serious bidder. Otherwise, we may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction. Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed. 

Please note that shipping and insurance costs are non-refundable. 

Our feedback is very important to us and we strive for 100% positive on every transaction. If you are unsatisfied with any aspect of your transaction, please contact us before leaving negative or neutral feedback so that we can address and remedy the issue immediately. Additionally, we are always happy to leave positive feedback for our trading partners after a successful transaction. 

Make sure that you check out our other auctions for more great deals on test and measurement equipment.

 

Thank you and good luck bidding.


 



 photo IMG_0401_zpsmuqd3kld.jpg

 photo IMG_0405_zpsqzl3l38e.jpg

 photo IMG_0406_zpsi9g3ea7b.jpg

 photo IMG_0415_zpst7pn5wtm.jpg

 photo IMG_0414_zpstqrbedd8.jpg

 photo IMG_0407_zpsouyzqu6g.jpg

 photo IMG_0413_zpsetv6qt5f.jpg

 photo IMG_0412_zpswsnndbvo.jpg

 photo IMG_0416_zpsuzcwpkwr.jpg

 photo IMG_0418_zpscrv1bmwt.jpg

 photo IMG_0419_zps2btgreih.jpg

 

Need your unit calibrated by an ISO 17025 accredited lab prior to shipment? Not a problem. We work with numerous calibration and repair companies that can provide your required service at competitive prices.

About Us

Spaulding Surplus, LLC was established in 2002 and we pride ourselves on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around. Our equipment is sourced from a variety of manufacturers including Agilent/HP, Fluke, Tektronix, Rohde & Schwarz, LeCroy, Anritsu, Advantest, Aeroflex/IFR, ILX Lightwave, JDSU, Wavetek, etc. We are also dedicated to providing fair and competitive bids for your unused test equipment and excess inventory. WHY PAY MORE FOR THE SAME EQUIPMENT?
 

Payment

We accept payment by company check, bank transfer and Paypal (for items valued below $1500 USD). Payment must be received within 5 days of close of auction. Our mailing address and bank info can be forwarded upon request.
 

Shipping

All instruments are professionally packed and shipped via UPS GROUND with full insurance. We typically ship within the continental US only (please no PO Boxes) unless other arrangements have been made with the buyer. International customers may provide their UPS, DHL or FedEx account for international shipments. Items will be shipped within 7 business days of payment. 
 

Terms

All items sold on Ebay come with a standard 30 day right of return warranty from the date of receipt, unless otherwise specified in the auction details. Payment in full is required prior to shipment. Buyers are required to notify us immediately if an instrument arrives damaged, and must keep all boxes and packing materials in case a UPS damage inspection is necessary. An extended warranty of 30 days is available for all direct purchases from Spaulding Surplus, LLC and established customers purchasing directly may qualify for net 30 payment terms with PO required prior to shipment.


Returns

All Ebay items can be returned for a full refund within 30 days of purchase should they not function as intended, unless they are being sold AS IS with known defects. Spaulding Surplus, LLC shall not be held liable for any damages resulting from buyer/operator negligence, or the improper use of its equipment, nor does it warrant their suitability for any specific application or project. The verification of product capability is the sole responsibility of the buyer. PO's and purchases cancelled due to insufficient instrument capability, buyer's remorse or loss of order are always subject to a 20% restocking fee. A complete evaluation is required for any instrument returned under warranty, and refunds are not issued until said evaluation has been completed by an ISO 17025 accredited calibration lab. 
WE KINDLY REQUEST THAT BUYERS CONTACT US FIRST SHOULD THERE BE ANY PROBLEMS WITH THE ITEM PURCHASED, RATHER THAN FILING A "NOT AS DESCRIBED" CLAIM WITH EBAY OR IMMEDIATELY LEAVING NEGATIVE FEEDBACK. WE HAVE BEEN IN BUSINESS FOR OVER 15 YEARS AND ALWAYS STRIVE FOR PERFECT FEEDBACK AND INTEND TO PROVIDE QUALITY EQUIPMENT AND EXCELLENT CUSTOMER SERVICE TO ALL OF OUR CUSTOMERS. IF YOU EVER HAVE A PROBLEM WITH A TRANSACTION WE WILL MAKE IT RIGHT!
 
 

Spaulding Surplus, LLC prides itself on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around.

 
More Items!
Keysight/Agilent N6841A 20 MHz - 6 GHz RF Sensor for Spectrum Monitoring - CAL'D
$5,750.00
Agilent Keysight E5052B SSA Signal Source Analyzer, 10 MHz to 7 GHz - CALIBRATED
$75,000.00
Anritsu MS2690A 50 Hz - 6 GHz Vector Signal Analyzer / Generator - CALIBRATED!
$21,950.00
Keysight N9020A 10 Hz - 26.5 GHz MXA Signal Analyzer - LOADED W/ MFG CALIBRATION
$59,990.00
 
 
Powered by Frooition
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.