Anritsu MS2691A 50 Hz - 13.5 GHz Vector Signal Analyzer / Generator - CALIBRATED!
You are bidding on an Anritsu MS2691A 50 Hz - 13.5 GHz Vector Signal Analyzer / Generator that is loaded with software and hardware options (see below). This unit will arrive with a fresh calibration performed by an ISO 17025 accredited lab!
The Signal Analyzer MS2690A/MS2691A/MS2692A (MS269xA) has the excellent general level accuracy, dynamic range and performance of a high-end spectrum analyzer. Its easy operability and built-in functions are perfect for tests of Tx characteristics. Not only can it capture wideband signals but FFT technology supports multifunction signal analyses in both the time and frequency domains. Behavior in the time domain that cannot be handled by a sweep type spectrum analyzer can be checked in the frequency domain. A wide frequency can be analyzed using sweep type spectrum analysis functions while detailed signal analysis of a specific frequency band is supported too. Moreover, the built-in signal generator function outputs both continuous wave (CW) and modulated signals for use as a reference signal source when testing Tx characteristics of parts and as a signal source for evaluating Rx characteristics.
Hardware Options Installed:
103: Extends Lower Limit of Pre-Selector to 3 GHz
108: 6 GHz Preamplifier (100 kHz to 6 GHz)
Software Options Installed:
MX269000A: Spectrum Analyzer / Signal Analyzer / Phase Noise / Recreate / Power Meter
MX269017A: Vector Modulation Analysis Software
MX269020A: LTE Dowlink Measurement Software
MX269024A: CDMA Forward Link Measurment Software
MX269026A: EV-DO Forward Link Measurment Software
MX269030A: W-CDMA BS Measurement Software
Anritsu MS2691A Features:
Frequency Range: 50 Hz to 13.5 GHz
Analysis Bandwidth: 31.25 MHz (Standard), 62.5 MHz / 125 MHz (Option)
One-Box Tester with the addition of the Signal Generator option
Batch Capture Measurements for the fastest analysis time
The Anritsu MS2691A Signal Analyzer is the latest high performance signal analyzer for next-generation communication applications. The Anritsu MS2691A Signal Analyzer base units include swept spectrum analysis, FFT signal analysis, and a precision digitizer function. Add options to incorporate a Signal Generator, to turn the instrument into a hassle free, plug and play, one box solution.
The Anritsu MS2691A Signal Analyzer supports a standard analysis bandwidth of 31.25 MHz that can be extended to 62.5 MHz /125 MHz with optional hardware. Using a patented calibration process, the multipoint amplitude calibration and the phase calibration result in a level accuracy of ±0.5 dB across a 6 GHz span. No other analyzer on the market can meet that specification! These boxes are superlative in every way -- they measure the widest signals and using the latest technology, make measurements faster than ever before. The modular architecture ensures a box that grows as measurement requirements change. A series of options enables standards-based modulation analysis, vector signal generation, and BER measurement. The end-user can configure a one-box solution that dramatically reduces cost, footprint, and Total Average Cycle Time (TACT) for device evaluation.
The Anritsu MS2691A Signal Analyzers are accurate enough for the most demanding R&D environment, yet are fast enough for the factory floor! Currently supported applications include GSM, GPRS, EDGE, W-CDMA, mobile WiMAX, and LTE. The wideband FFT signal analyzer (analysis bandwidth of 31.25 MHz with option for 62.5 MHz /125 MHz) supports high-speed continuous measurements including CCDF, frequency vs. time, spectrum, and power vs. time analysis. The standard digitizing function can capture waveforms and immediately play them out using the optional Signal Generator. An extended digitizer option adds the ability to capture signals up to 20 MHz wide for up to 4 hours.
This unit is in excellent condition, has been fully tested and is guaranteed functional. It comes w/ a 14 day right of return should it not perform to your expectations. Please review pics and text carefully before bidding to verify accuracy of description. If you don't see it in the pictures, it is not included.
Insurance is included in UPS shipping charges.
Item shipped internationally on buyer's UPS, FEDEX or DHL accounts only.We will accept payment for this item by company check, cashier’s check and wire transfer only.
Feel free to send any questions regarding this item to:
(in fact I encourage you to do so)
If you have zero feedback,
contact us prior to purchase so we know you are a serious bidder. Otherwise, we may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction.
Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed.
Please note that shipping and insurance costs are non-refundable.
Our feedback is very important to us and we strive for 100% positive on every transaction. If you are unsatisfied with any aspect of your transaction, please contact us before leaving negative or neutral feedback so that we can address and remedy the issue immediately. Additionally, we are always happy to leave positive feedback for our trading partners after a successful transaction.
Make sure that you check out
my other auctions for great deals on other test and measurement equipment.
Thank you and good luck bidding.
