Ando AQ4321D 1520 nm - 1620 nm Tunable Laser Source with FRESH CALIBRATION!

$9,990.00

(No reviews yet) Write a Review

SKU:: 273441784730
Condition:: Refurbished
Brand:: ANDO
Model:: AQ4321D
MPN:: AQ4321D

Ando AQ4321D 1520 nm - 1620 nm Tunable Laser Source with FRESH CALIBRATION!

Current Stock:

Quantity:

Product Description

Seller refurbished

Shop Categories

All Categories

We buy, sell and rent general purpose, optical and RF test and measurement equipment. We pay top dollar for your unwanted, surplus or defective gear. Let us make you an offer on your new or used Agilent, Tektronix, Anritsu, Fluke, Rohde & Schwarz and IFR instruments.

Ando AQ4321D 1520 nm - 1620 nm Tunable Laser Source with FRESH CALIBRATION!

Item Description

Ando AQ4321D 1520 nm - 1620 nm Tunable Laser Source with FRESH CALIBRATION!

You are bidding on an Ando AQ4321D 1520 nm - 1620 nm Tunable Laser Source. It will arrive with a fresh calibration performed by an ISO 17025 accredited lab. The AQ4321D is a Tunable Laser Source with precise wavelength control in the 1520 to 1620 nm range. It has excellent basic performance such as high-speed sweep, high stability, and narrow linewidth. Resolution is 0.001 nm. Full remote control is available via IEEE-488 or RS232C interfaces. An internal hard drive and 3.5 inch floppy disk make test setups easy to store and recall.

Specifications:

- Wavelength range: 1520 to 1620 nm

- Wavelength set resolution: 0.001nm

- Wavelength stability: ±100 MHz/h (±0.8 pm/h) (typ.)

- Absolute wavelength accuracy: ±0.1nm, ±0.015 nm, ±0.01 nm (typ.)

- Relative wavelength accuracy: ±0.01 nm (typ.)

- Spectral width (Narrow): 200 kHz (typ.) (1 MHz or less)

- Spectral width (Wide): 200 MHz (typ.) (100 MHz or more)

- Side-Mode Suppression Ratio: 50 dB or more (optical output: +6 dBm, 1590 nm)

- Optical output +6 dBm or more, 1560 to 1600 nm; +7 dBm (typ.) peak

- Settable optical output range: 20 dB or more (0.1 dB steps, at peak wavelength)

- Optical output stability: 5 min, ±0.01dB or less; 1 hr, ±0.05dB or less; 8 hr, ±0.3dB or less

- Optical output accuracy: ±1dB or less

- Optical output reproducibility: ±0.04 dB, optical output fixed

- Optical output level flatness: ±0.1 dB ((1540 to 1600 nm)). RIN: -145dB/Hz (typ.)

- Internal modulation (CHOP): Set frequency 0.2 to 300kHz; Set resolution 10Hz, 100Hz, 1kHz, 10kHz, 100kHz

- External modulation (CHOP): Set frequency 0.2 to 300kHz

- Direct modulation: Modulation rate 5% or less (Modulation frequency: 100 kHz to 300 MHz, modulation input level: 0 dBm or less)

- Wavelength sweep speed: 100nm/sec (Max.)

You can view the specs for this unit here: Data Sheet

This unit is in excellent condition, has been fully tested and is guaranteed functional. It comes w/ a 14 day right of return should it not perform to your expectations. Please review pics and text carefully before bidding to verify accuracy of description. If you don't see it in the pictures, it is not included.

Insurance is included in UPS shipping charges. Item shipped internationally on buyer's UPS, FEDEX or DHL accounts only.

We will accept payment for this item by company check, cashier’s check and wire transfer only.

Feel free to send any questions regarding this item to:

(in fact I encourage you to do so)

If you have zero feedback, contact us prior to purchase so we know you are a serious bidder. Otherwise, we may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction. Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed.

Please note that shipping and insurance costs are non-refundable.

Our feedback is very important to us and we strive for 100% positive on every transaction. If you are unsatisfied with any aspect of your transaction, please contact us before leaving negative or neutral feedback so that we can address and remedy the issue immediately. Additionally, we are always happy to leave positive feedback for our trading partners after a successful transaction.

Make sure that you check out my other auctions for great deals on other test and measurement equipment.

Thank you and good luck bidding.

Need your unit calibrated by an ISO 17025 accredited lab prior to shipment? Not a problem. We work with numerous calibration and repair companies that can provide your required service at competitive prices.