Used
We buy, sell and rent general purpose, optical and RF test and measurement equipment. We pay top dollar for your unwanted, surplus or defective gear. Let us make you an offer on your new or used Agilent, Tektronix, Anritsu, Fluke, Rohde & Schwarz and IFR instruments.
Agilent N5230A 20GHz 4Port Vector Network Analyzer with Options 080 & 246 - Keysight CALIBRATED!
You are bidding on an Agilent N5230A 300 kHz to 20 GHz, 4 Port Vector Network Analyzer with Options 080 (Frequency Offset Mode) and 246 (300 kHz to 20 GHz 4-Port Configurable Test Set, Extended Power Range and Internal Second Source). This unit will arrive with a fresh calibration performed by Keysight Technologies, with full test data included!
The Keysight / Agilent 4-port PNA-L vector network analyzer is a member of the PNA series network analyzer platform and provides the best combination of speed and accuracy for measuring multiport and balanced components such as filters, duplexers and RF modules up to 20 GHz. The 4-port PNA-L automatic port extension feature automatically measures and corrects for fixtures, making measurements of in-fixture devices simple and accurate. This new feature also corrects for a fixture insertion loss to further improve accuracy. In addition, the Agilent optional Electronic Calibration (ECal) modules enable engineers to perform fast, repeatable and highly accurate calibrations. With ECal, full two-, three-, and four-port calibration can be performed up to 30 times faster than mechanical calibration.
Option 246 is a 4-port, S-parameter, auto-reversing, configurable test set with extended power range and a second internal source for the N5230A/C PNA-L network analyzer. The configurable test set provides access to the signal path between the internal source and the analyzer's test ports. This option provides the capability to improve instrument sensitivity for measuring low-level signals, to reverse the directional coupler to achieve even more dynamic range or to add components or other peripheral instruments for a variety of applications such as high-power measurements. The extended power range adds a 60 dB step attenuator internally to the RF source path. This attenuator extends the source output power range to over 80 dB, allowing for maximum flexibility when stimulating the device under test. The second internal source is independently tunable and can be used to provide a second stimulus for intermodulation testing of amplifiers and for use as a local oscillator (LO) signal for testing conversion loss of mixers and frequency converters.
THIS INSTRUMENT WITH THIS OPTION CONFIGURATION HAS A LIST PRICE OVER 100K!
Features:
- Integrated Full 4-port S-Parameter and balanced measurements up to 20 GHz (option 246)
- 103 dB dynamic range and < 0.004 dB trace noise
- 4.5 usec/point measurement speed, 32 channels, 16,001 points
- Automatic port extension automatically corrects for in-fixture measurements
- Optional second internal source for fast measurements of amplifier intermodulation distortion and mixer/converter conversion loss
- Flexible test set architecture allows user to reconfigure test set and add external components for specific applications such as high power measurements, highest dynamic range measurements, and more
- Internal RF source step attenuator allows for output power range greater than 80 dB
- Option 080 for Frequency Offset Measurements
This unit is in excellent condition, has been fully tested and is guaranteed functional. It comes with a fresh calibration and a 14 day right of return should it not perform to your expectations. Please review pics and text carefully before bidding to verify accuracy of description. If you don't see it in the pictures, it is not included.
Insurance is included in UPS shipping charges. Item shipped internationally on buyer's UPS, FEDEX or DHL accounts only.
We will accept payment for this item by company check, cashier’s check and wire transfer only.
If you have zero feedback, contact us prior to purchase so we know you are a serious bidder. Otherwise, we may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction. Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed.
Please note that shipping and insurance costs are non-refundable.
Our feedback is very important to us and we strive for 100% positive on every transaction. If you are unsatisfied with any aspect of your transaction, please contact us before leaving negative or neutral feedback so that we can address and remedy the issue immediately. Additionally, we are always happy to leave positive feedback for our trading partners after a successful transaction.
Make sure that you check out our other auctions for more great deals on test and measurement equipment.
Thank you and good luck bidding.
Need your unit calibrated by an ISO 17025 accredited lab prior to shipment? Not a problem. We work with numerous calibration and repair companies that can provide your required service at competitive prices.
Spaulding Surplus, LLC was established in 2002 and we pride ourselves on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around. Our equipment is sourced from a variety of manufacturers including Agilent/HP, Fluke, Tektronix, Rohde & Schwarz, LeCroy, Anritsu, Advantest, Aeroflex/IFR, ILX Lightwave, JDSU, Wavetek, etc. We are also dedicated to providing fair and competitive bids for your unused test equipment and excess inventory. WHY PAY MORE FOR THE SAME EQUIPMENT?
We accept payment by company check, bank transfer and Paypal (for items valued below $1500 USD). Payment must be received within 5 days of close of auction. Our mailing address is below and our bank info can be forwarded upon request. Spaulding Surplus 12829 Landale Street Studio City, CA 91604.
All instruments are professionally packed and shipped via UPS GROUND with full insurance. We typically ship within the continental US only (please no PO Boxes) unless other arrangements have been made with the buyer. International customers may provide their UPS, DHL or FedEx account for international shipments. Items will be shipped within 7 business days of payment.
All items sold on Ebay come with a standard 30 day right of return warranty from the date of receipt, unless otherwise specified in the auction details. Payment in full is required prior to shipment. Buyers are required to notify us immediately if an instrument arrives damaged, and must keep all boxes and packing materials in case a UPS damage inspection is necessary. An extended warranty of 30 days is available for all direct purchases from Spaulding Surplus, LLC and established customers purchasing directly may qualify for net 30 payment terms with PO required prior to shipment.
Spaulding Surplus typically offers a 30 day right of return for equipment received damaged or non-functional. However, Spaulding Surplus, LLC shall not be held liable for any damages resulting from buyer/operator negligence, or the improper use of its equipment, nor does it warrant their suitability for any specific application or project. The verification of product capability is the sole responsibility of the buyer. PO’s and purchases cancelled due to insufficient instrument capability, buyer’s remorse or loss of order are always subject to a minimum 20% restocking fee. A complete evaluation is required for any instrument returned under warranty, and refunds are not issued until said evaluation has been completed by an ISO 17025 accredited calibration lab.
Spaulding Surplus, LLC prides itself on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around.
