Seller refurbished
We buy, sell and rent general purpose, optical and RF test and measurement equipment. We pay top dollar for your unwanted, surplus or defective gear. Let us make you an offer on your new or used Agilent, Tektronix, Anritsu, Fluke, Rohde & Schwarz and IFR instruments.
You are bidding on an an Agilent / HP E7401A 9 kHz to 1.5 GHz EMC / Spectrum Analyzer with Options A4H (GPIB and Centronics Interface), AYQ (EMI Detectors and FM Demodulation), 060 (Low Emission), 1DS (Preamplifier), 1DR (Narrow Resolution Bandwidths) and B72 (Increase memory to 16MB). It will arrive with a fresh calibration performed at an ISO17025 accredited lab. Customers looking for a general purpose spectrum analyzer will appreciate the flexibility of the ESA spectrum analyzer that can be used for a wide range of applications from aerospace and defense to the manufacturing line.
The Agilent E7401A EMC Analyzer provides the capabilities you need in an analyzer to make in-house EMI pre-compliance testing a reality. When combined with a broadband antenna, the E7405A has the capabilities to check for radiated emissions coming from your DUT. Test for noise or interference placed on power or data lines by coupling the E7401A instrument to the power or data line through a line impedance stabilization network device or absorbing clamp. If you have an emissions problem, you can use the E7401A with an 11940A or 11941A close field probe to isolate and diagnose the source of the problem. This EMC analyzer has all the capabilities needed to perform EMI measurements including quasi-peak detector, average detector, EMI bandwidths, limit lines, and supports correction factors for antennas, cables, and amplifiers.
Features:
Automatic EMI measurements
Compatible with the E7415A EMI software
Built-in preamplifier analyzer, -166 dBm/Hz displayed average noise level
1 Hz resolution bandwidth
Built-in FM demodulation
4000 second sweep for wider span QP measurements
Fast sweep times, 1 ms minimum or 25 ns in zero span
Flexible sweep points from 101 to 8192
Also compatible with the BenchLink Web Remote software
1.0 dB overall amplitude accuracy (< 3 GHz)
± 0.5% span accuracy
Built-in frequency counter
GPIB Interface
You can view the performance specifications for this instrument here: Data Sheet
Thank you and good luck bidding.
Need your unit calibrated by an ISO 17025 accredited lab prior to shipment? Not a problem. We work with numerous calibration and repair companies that can provide your required service at competitive prices.