Agilent E9301B 10 MHz to 6 GHz Power Sensor, -30 to +44 dBm - CALIBRATED!

$1,590.00
(No reviews yet) Write a Review
SKU:
255185786880
Condition:
Used
Brand:
Agilent
MPN:
E9301B
Agilent E9301B 10 MHz to 6 GHz Power Sensor, -30 to +44 dBm - CALIBRATED!

Product Description

 
 

Agilent E9301B 10 MHz to 6 GHz Power Sensor, -30 to +44 dBm - CALIBRATED!

 
Item Description

Agilent E9301B 10 MHz to 6 GHz Power Sensor, -30 to +44 dBm - CALIBRATED!


You are bidding on a Agilent E9301B 10 MHz to 6 GHz Power Sensor with a power range of -30 to +44 dBm.  
It is designed for use with the EPM and EPM-P series power meters for measurements on all types of signals, from complex digital modulation formats, such as W-CDMA, CDMA (IS-95), TDMA and OFDM, to multi-tone and CW signals. Also, for comprehensive error correction, the sensor's calibration factors, linearity and temperature compensation data are stored in EEPROM.
 
The Agilent E9301B E- Series power sensor is a true average, wide dynamic range RF microwave power sensor. It is based on a dual sensor diode pair/attenuator/diode pair proposed by Szente et. al. in 1990. This technique ensures the diodes in the selected signal path are kept in their square law region, thus the output current (and voltage) is proportional to the input power. This sensor measures average RF power on a wide variety of modulated signals and are independent of the modulation bandwidth. It is ideally suited to the average power measurement of multi- tone and spread spectrum signals such as CDMA, W- CDMA and digital television formats. The Agilent E9301B power sensor is NOT compatible with the earlier Agilent 430- Series, Agilent E1416A, or Agilent 70100A power meters.
 
 
Specifications:
 
  • Measure the average power of all modulation formats.
  • Wide dynamic range power measurements from -30 dBm to +44 dBm.
  • 10 MHz to 6 GHz frequency coverage for Wireless Comms formats.
  • Low SWR for reducing mismatch uncertainty.
  • Calibration factors, linearity and temperature compensation data stored in EEPROM.
  • Compatible with EPM (N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters
 

This unit is in excellent condition, has been fully tested and is guaranteed functional. It comes with a 30 day warranty should it not perform to your expectations. Please review pics and text carefully before bidding to verify accuracy of description. If you don't see it in the pictures, it is not included.

Insurance is included in UPS shipping charges. Item shipped internationally on buyer's UPS, FEDEX or DHL accounts only.

We will accept payment for this item by company check, cashier’s check and wire transfer only. 

If you have zero feedback, contact us prior to purchase so we know you are a serious bidder. Otherwise, we may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction. Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed. 

Please note that shipping and insurance costs are non-refundable. 

Our feedback is very important to us and we strive for 100% positive on every transaction. If you are unsatisfied with any aspect of your transaction, please contact us before leaving negative or neutral feedback so that we can address and remedy the issue immediately. Additionally, we are always happy to leave positive feedback for our trading partners after a successful transaction. 

Make sure that you check out our other auctions for more great deals on test and measurement equipment.

 

Thank you and good luck bidding





IMG_0114_(1)

IMG_0115_(1)

IMG_0117_(1)

IMG_0118_(1)

IMG_0119_(1)

IMG_0120_(1)

IMG_0121_(1)

IMG_0122_(1)

E9301B_Cal_Certificate-page-001
 

Need your unit calibrated by an ISO 17025 accredited lab prior to shipment? Not a problem. We work with numerous calibration and repair companies that can provide your required service at competitive prices.

About Us

Spaulding Surplus, LLC was established in 2002 and we pride ourselves on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around. Our equipment is sourced from a variety of manufacturers including Agilent/HP, Fluke, Tektronix, Rohde & Schwarz, LeCroy, Anritsu, Advantest, Aeroflex/IFR, ILX Lightwave, JDSU, Wavetek, etc. We are also dedicated to providing fair and competitive bids for your unused test equipment and excess inventory. WHY PAY MORE FOR THE SAME EQUIPMENT?
 

Payment

We accept payment by company check, bank transfer and Paypal (for items valued below $1500 USD). Payment must be received within 5 days of close of auction. Our mailing address is below and our bank info can be forwarded upon request.
Spaulding Surplus
12829 Landale Street
Studio City, CA 91604.
 

Shipping

All instruments are professionally packed and shipped via UPS GROUND with full insurance. We typically ship within the continental US only (please no PO Boxes) unless other arrangements have been made with the buyer. International customers may provide their UPS, DHL or FedEx account for international shipments. Items will be shipped within 7 business days of payment. 
 

Terms

All items sold on Ebay come with a standard 30 day right of return warranty from the date of receipt, unless otherwise specified in the auction details. Payment in full is required prior to shipment. Buyers are required to notify us immediately if an instrument arrives damaged, and must keep all boxes and packing materials in case a UPS damage inspection is necessary. An extended warranty of 30 days is available for all direct purchases from Spaulding Surplus, LLC and established customers purchasing directly may qualify for net 30 payment terms with PO required prior to shipment. 


Returns

All Ebay items can be returned for a full refund within 30 days of purchase should they not function as intended, unless they are being sold AS IS with known defects. Spaulding Surplus, LLC shall not be held liable for any damages resulting from buyer/operator negligence, or the improper use of its equipment, nor does it warrant their suitability for any specific application or project. The verification of product capability is the sole responsibility of the buyer. PO's and purchases cancelled due to insufficient instrument capability, buyer's remorse or loss of order are always subject to a 20% restocking fee. A complete evaluation is required for any instrument returned under warranty, and refunds are not issued until said evaluation has been completed by an ISO 17025 accredited calibration lab. 
WE KINDLY REQUEST THAT BUYERS CONTACT US FIRST SHOULD THERE BE ANY PROBLEMS WITH THE ITEM PURCHASED, RATHER THAN FILING A "NOT AS DESCRIBED" CLAIM WITH EBAY OR IMMEDIATELY LEAVING NEGATIVE FEEDBACK. WE HAVE BEEN IN BUSINESS FOR OVER 15 YEARS AND ALWAYS STRIVE FOR PERFECT FEEDBACK AND INTEND TO PROVIDE QUALITY EQUIPMENT AND EXCELLENT CUSTOMER SERVICE TO ALL OF OUR CUSTOMERS. IF YOU EVER HAVE A PROBLEM WITH A TRANSACTION WE WILL MAKE IT RIGHT!
 
 

Spaulding Surplus, LLC prides itself on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around.

 
More Items!
Agilent / Keysight N1921A Wideband Power Sensor, 50MHz - 18GHz - CALIBRATED!
$4,450.00
Pair of 2 Agilent U2004A 9 KHz - 6 GHz (-60 to +20) dBm USB Power Sensors
$590.00
Agilent N1923A Wideband Power Sensor, 50 MHz to 18 GHz - KEYSIGHT CALIBRATED!
$4,750.00
Agilent U2004A 9 KHz - 6 GHz (-60 to +20) dBm USB Power Sensor - Keysight CAL'D
$2,950.00
 
 
Powered by Frooition
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.