Agilent E4412A RF Power Sensor 10MHz to 18GHz, -70 dBm to +20 dBm - CALIBRATED!

$1,350.00
(No reviews yet) Write a Review
SKU:
275011154857
Condition:
Used
Brand:
Agilent
MPN:
E4412A
Agilent E4412A RF Power Sensor 10MHz to 18GHz, -70 dBm to +20 dBm - CALIBRATED!

Product Description

 
 
Agilent E4412A RF Power Sensor 10MHz to 18GHz, -70 dBm to +20 dBm - CALIBRATED!
 
Item Description

Agilent E4412A RF Power Sensor 10MHz to 18GHz, -70 dBm to +20 dBm - CALIBRATED!

You are bidding on an Agilent E4412A RF Power Sensor 10 MHz to 18 GHz, -70 dBm to +20 dBm.  It will arrive with a calibration performed by an ISO 17025 accredited lab.

Keysight / Agilent E4412A Power Sensor, 10 MHz to 18 GHz, 100 pW to 100 mW, -70 dBm to +20 dBm


The E4412A diode power sensor, with wide dynamic range, is designed for use with the EPM and EPM-P series power meters for power measurements on CW signals from 10 MHz to 18 GHz. The E4412A power sensor provides extremely low SWR to minimize the source and sensor mismatch errors. Also, for comprehensive error correction, the calibration factors, linearity and temperature error-correction information are stored in EEPROM.


  • Features:
    • Frequency Range: 10 MHz to 18 GHz
    • Measurement range: 100 pW to 100 mW ( -70 dBm to +20 dBm)
    • 50 ohm input impedance
    • N (m) connector
    • Calibration factors stored in EEPROM
    • Compatible with the EPM and EPM-P series power meters
    • Shipping Weight: 2 lb
    • This unit is in excellent condition, has been fully tested and is guaranteed functional. It comes with a 30 day right of return should it not perform to your expectations. Please review pics and text carefully before bidding to verify accuracy of description. If you don't see it in the pictures, it is not included
    • Insurance is included in UPS shipping charges. Item shipped internationally on buyer's UPS, FEDEX or DHL accounts only.
    • We will accept payment for this item by company check, cashier’s check and wire transfer only. 
    • If you have zero feedback, contact us prior to purchase so we know you are a serious bidder. Otherwise, we may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction. Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed. 
    • Please note that shipping and insurance costs are non-refundable. 
    • Our feedback is very important to us and we strive for 100% positive on every transaction. If you are unsatisfied with any aspect of your transaction, please contact us before leaving negative or neutral feedback so that we can address and remedy the issue immediately. Additionally, we are always happy to leave positive feedback for our trading partners after a successful transaction. 


Make sure that you check out our other auctions for more great deals on test and measurement equipment.

 

 

Thank you and good luck bidding





(edited)_IMG_0587

(edited)_IMG_0589

IMG_0592

IMG_0593 

e4412a_cal_Certificate_2021-page-001<br.
  e4412a_cal_Certificate_2021-page-002 

   e4412a_cal_Certificate_2021-page-003  

  e4412a_cal_Certificate_2021-page-004  

 e4412a_cal_Certificate_2021-page-005

   
 

Need your unit calibrated by an ISO 17025 accredited lab prior to shipment? Not a problem. We work with numerous calibration and repair companies that can provide your required service at competitive prices.

About Us

Spaulding Surplus, LLC was established in 2002 and we pride ourselves on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around. Our equipment is sourced from a variety of manufacturers including Agilent/HP, Fluke, Tektronix, Rohde & Schwarz, LeCroy, Anritsu, Advantest, Aeroflex/IFR, ILX Lightwave, JDSU, Wavetek, etc. We are also dedicated to providing fair and competitive bids for your unused test equipment and excess inventory. WHY PAY MORE FOR THE SAME EQUIPMENT?
 

Payment

We accept payment by company check, bank transfer and Paypal (for items valued below $1500 USD). Payment must be received within 5 days of close of auction. Our mailing address is below and our bank info can be forwarded upon request.  Spaulding Surplus 12829 Landale Street Studio City, CA 91604.
 

Shipping

All instruments are professionally packed and shipped via UPS GROUND with full insurance. We typically ship within the continental US only (please no PO Boxes) unless other arrangements have been made with the buyer. International customers may provide their UPS, DHL or FedEx account for international shipments. Items will be shipped within 7 business days of payment. 
 

Terms

All items sold on Ebay come with a standard 30 day right of return warranty from the date of receipt, unless otherwise specified in the auction details. Payment in full is required prior to shipment. Buyers are required to notify us immediately if an instrument arrives damaged, and must keep all boxes and packing materials in case a UPS damage inspection is necessary. An extended warranty of 30 days is available for all direct purchases from Spaulding Surplus, LLC and established customers purchasing directly may qualify for net 30 payment terms with PO required prior to shipment. 


Returns

Spaulding Surplus typically offers a 30 day right of return for equipment received damaged or non-functional.  However, Spaulding Surplus, LLC shall not be held liable for any damages resulting from buyer/operator negligence, or the improper use of its equipment, nor does it warrant their suitability for any specific application or project. The verification of product capability is the sole responsibility of the buyer.  PO's and purchases cancelled due to insufficient instrument capability, buyer's remorse or loss of order are always subject to a minimum 20% restocking fee. A complete evaluation is required for any instrument returned under warranty, and refunds are not issued until said evaluation has been completed by an ISO 17025 accredited calibration lab. 


 

Spaulding Surplus, LLC prides itself on sustaining an expansive and diverse inventory of high value test equipment, in stock and ready to ship. We strive to exceed our customers expectations by providing quality general purpose electronic test and measurement equipment at the absolute lowest prices around.

 
More Items!
Anritsu MA2445A 10 MHz - 50 GHz (-67 dBm to +20 dBm) Power Sensor - CALIBRATED!
$3,750.00
Anritsu MA2475D 10 MHz - 50 GHz (–-70 to +20 dBm) Power Sensor - CALIBRATED!
$3,950.00
Rohde & Schwarz FSH-Z18 10MHz - 18 GHz, ?67 dBm to + 23 dBm Power Sensor - CAL'D
$1,250.00
Rohde & Schwarz NRP-Z51 18 GHz -35 dBm to + 20 dBm Thermal Power Sensor - CAL'D
$1,790.00
 
 
Powered by Frooition
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.